Step 1
Start your PC and place your Windows XP CD in your CD/DVD-ROM drive.Your PC will automatically detect the CD and you and you will get a message saying "Press any key to boot from CD".Press space bar or enter key to continue.
Check the following figure
Step 2
In the first stage of Setup, you will see a series of blue and gray MS-DOS-based screens. In the first step, you will be asked to press F6 if you need to install any third-party or RAID drivers. Then, you can press F2 to initiate the Automated System Recovery (ASR) tool, a new XP feature that lets you recover non-booting systems from XP Setup. Ignore this. Finally, Setup will load the files it needs to start the installation.
Check the following figure
Step 3
Finally, Setup begins. In this step, you can set up XP, launch the Recovery Console (a system recovery tool), or quit. Press ENTER to continue Setup, now it will examine your hard drives and removable disks.
Check the following figure
Step 4
Next, you'll have to agree to Microsoft's licensing agreement. Hit F8 to continue.
Check the following figure
Step5
This step lets you choose where to install Windows XP. On a clean install, you will typically install to the C: drive. Setup will show you all of your available disks (in this case, just one) and let you create and delete partitions as needed.
Check the following figure
Step 6
If you created a new partition, or wish to change the file system of an existing partition, you can do so in this next step. We recommend choosing NTFS, since it’s the most secure file system available.
Check the following figure
Step 7
If you did choose to change or format the file system, this will occur next. First, you'll be asked to verify the format. If you're installing XP on a system with more than one partition, especially one that still holds your data on one of the partitions, be sure you're formatting the correct partition. Hit F to continue, and a yellow progress bar will indicate the status of the format. When this is complete, Setup will again examine your disks, and create a list of files to copy.
Check the following figure
Step 8
Setup will now copy system files to the system/boot partition(s) you just created. This will allow the PC to boot from the C: drive and continue Setup in GUI mode. When the file copy is complete, Setup will initialize and save your XP configuration. It will then reboot your PC. When the system reboots, you will probably see the "Press any key to boot from CD" message again. If this happens, do not press a key: Setup will now boot from your C: drive. In the event that you cannot prevent the CD-based Setup from reloading, eject the CD and reboot. Setup will ask for the CD when needed.
Check the following figure
Step 9
Once the system reboots, you will be presented with the GUI Setup phase. Next, your hardware devices are detected. This could take several minutes.
Step 10
In the first interactive portion of GUI Setup, you can choose to customize the regional and language settings that will be used by XP, as well as the text input language you'd like. Users in the United States will not need to change anything here. Click Next to continue.
Check the following figure
Step 11
Enter your name and, optionally, your company. The name you enter is not the same as your user name, incidentally, so you should enter your real name here (i.e. John Doe or whatever). Click Next to continue.
Check the following figure
Step 12
Now you must enter the 25-character product key that is located on the orange sticker found on the back of the CD holder that came with Windows XP. You cannot install XP without a valid product key.
a. Later on, you will be asked to activate and optionally register your copy of Windows XP. A product key can be used to install XP on only one PC.
b. Click Next to continue.
Check the following figure
Step 13
In the next phase of Setup, you can create a name for your computer (which is used to identify it on a network) and, optionally in Pro Edition only, a password for the system Administrator, the person who controls the PC (this will generally be you, of course).
a. Setup generates a random name for your PC, so it is recommended renaming it something more logical (i.e. John_Doe_PC). After Setup is complete, you can provide a better description of the PC too (like John Doe's desktop computer or whatever).
b. In XP Pro, the Administrator password is optional--that is, you can leave it blank--but I strongly recommend that you provide a good password here for security reasons. Windows XP Home doesn't allow you to enter an Administrator password, as this account is hidden on Home installs. So you can only enter a machine name in Home Edition.
c. Click Next to continue.
Check the following figure
Step 14
Next, you can supply the date and time, which are auto-set based on information in your BIOS, and the time zone, which is set to PST. Change these as appropriate. Click Next to continue.
Check the following figure
Step 15
If you have a networking card or modem, Setup now installs the networking components, which include the client for Microsoft networks, File and Print Sharing, the Quality of Service (QoS) Packet Scheduler, and the TCP/IP networking protocol by default.
Check the following figure
Step 16
In this phase, you can choose to keep the default settings (recommended) or enter custom settings. Click Next to continue.
a. In Windows XP Professional only, you will be able to select a workgroup or domain name next. Home Edition doesn't work with Windows domains, however, and Setup will automatically supply the workgroup name MSHOME, which you can change later. The default workgroup name in XP Pro is, WORKGROUP. Click Next to continue.
Check the following figure
Step 17
From this point on, Setup will continue to completion without any further need for interaction.
a. Setup will now copy files, complete installation, install your Start Menu items, register system components, save settings, remove any temporary files needed by Setup, and then reboot.
b. Again, you will probably see the "Press any key to boot from CD" message on reboot. If this happens, do not press a key, and your new XP install will boot up. You can remove the XP Setup CD now.
Check the following figure
Step 18
You'll be greeted by the XP splash screen on first boot. The splash screens for XP Pro and Home are subtly different.
Check the following figure
Step 19
Users with CRT monitors and some LCDs (such as laptops and flat panel displays) will see a Display Settings dialog appear. This asks whether you'd like XP to automatically set the resolution. Click OK and let XP change the resolution. Then, accept the settings if the screen display changes and can be read. If you can't see the display, it will time out after 30 seconds and return to the 800 x 600 resolution. Click OK to accept the screen resolution change.
Check the following figure
Step 20
Now, you are presented with XP's "Out of Box Experience," (OOBE) which presents a wizard to guide you through the final set up of your PC. Click Next to continue.
Check the following figure
Step 21
In the opening OOBE phase, you are asked to set up your network/Internet connection, which is required for activation and registration. If you selected the default networking configuration during Setup and know it will work, then select Yes. Otherwise, you can select No and then Skip.
a. We'll assume that your network is up and running and select Yes. Click Next to continue.
Check the following figure
Step 22
If you selected Yes in the previous step, you are asked if you'd like to activate Windows XP. This will tie your copy of XP to the current PC semi-permanently, so be sure this is what you want. Activation requires a connection to the Internet, but you can perform this step later if you want.
a. It is recommended to select No here, since you can activate later. If you do select Yes, you are asked whether you'd like to register the product. Unlike activation, registration is optional.
Check the following figure
Step 23
Now, you can set up the user names of the people who will be using the PC. You will want at least one user (for you), since you shouldn't be logging on as Administrator.
a. Click Finish when done creating users. At this point, OOBE ends and you are ready to go. Click Finish again.
Check the following figure
Step 24
Now you are presented with the XP Welcome Screen for the first time. This will list all of the users you created. When you click on a user name, that account will logon and you'll be presented with the XP desktop. After you create passwords, however, you'll be asked to enter a password before you can logon.
Check the following figure
Now your Window XP is properly installed on your system..........ENJOY
